Figure 1 is an example
of the detail window for large file transfers (in this example, an
error condition is not shown).
Figure 1. Window: Large
file transfer details
Description: A partition state was found to not
be Active.
Note: If the Large File Transfer status is FAILED, the remaining
System Check Types below it cannot be displayed.
Action:
In the System Check Type column, reference the OpenServiceableEventsCheck
result.
If the result is FAILED, display and repair any open serviceable
events that are related to the CEC enclosures. If the repair is successful,
you can retry the View Storage Facility State. If the repair fails,
contact your next level of support. The next level of support must
remotely connect to repair this condition.
If the result is PASSED, contact your next level of support. The
next level of support must remotely connect to repair this condition.
Next level of support only: The command -/opt/hsc/bin>
lspartition -all is run and the following output is checked
for the Active state to be 3:
