Section-16, Cable bundle 1, connecting green to upper UPS (E61) and yellow to lower UPS (E62)

Procedure

  1. Remove the orange hook-and-loop cable ties and pink bubble pack from both cable groups as needed.
    1. The group for UPS (E61, upper) has green connectors.
    2. The group for UPS (E62, lower) has yellow connectors.
  2. Route, connect, and fasten the cables with green connectors to the upper UPS.
    1. Route the cables over the rear cable tie bar (white) and over the front cable tie bar (green). See Figure 1.
    2. Connect the cables to the UPS. See Figure 2.
    3. Fasten the cables to the front cable tie bar (green) using hook-and-loop cable ties.
    Figure 1. UPS cable tie bars
    UPS cable tie bars
    Figure 2. Locations, UPS (rear)
    Locations, UPS (rear)
  3. Route, connect, and fasten the cables with yellow connectors to the lower UPS.
    1. Route the cables under the rear cable tie bar (white) and over the front cable tie bar (yellow). See Figure 1.
    2. Connect the cables to the UPS. See Figure 2.
    3. Fasten the cables to the front cable tie bar (yellow) using hook-and-loop cable ties.
  4. Fasten the cables to the rear cable tie bar using two blue hook-and-loop cable ties over the blue tape bands on the bar.