Section-40, Cable bundle 4, connecting to the upper CEC enclosure (XC1) (optional feature)

Procedure

  1. Locate the cable group with bubble pack labeled CEC enclosure (XC1, upper).
  2. Connect the cables to the XC1-P1-C7-T2 and T3 connectors. See Figure 1.
    Figure 1. Upper XC1 CEC enclosure location codes (rear view) (Model 983)
    CEC enclosure location codes (rear view) (Model 983)
  3. Use the blue hook-and-loop fasteners to tie cable bundle 4 to the cable tie bar at the two blue bands on the bar.