I/O enclosure LED indicators (Models 961, 96E)

This section contains FRUs that have LED indicators. Each listed assembly is shown with a description of its LEDs. Do not use LEDs as a starting point for diagnosing a problem.

I/O enclosure front

Table 3. Interpreting the LEDs on the I/O enclosure (front)

Index	LED Function	Location	Color	LED Off	LED On	LED Flash
1	Input power for I/O enclosure power supply	E1	green	no input	input good	n/a
2	Output power for I/O enclosure power supply	E1	green	standby off	output on	standby
3	Identify for I/O enclosure power supply	E1	amber	normal	n/a	fast = identify, slow = com fail
4	Input power for I/O enclosure power supply	E2	green	no input	input good	n/a
5	Output power for I/O enclosure power supply	E2	green	standby off	output on	standby
6	Identify for I/O enclosure power supply	E2	amber	normal	n/a	fast = identify, slow = com fail
7	Identify for I/O enclosure fan	A1	amber	normal	n/a	identify
8	Identify for I/O enclosure fan	A2	amber	normal	n/a	identify
9	Identify for I/O enclosure	P1	blue	normal	identify	n/a
10	Power for I/O enclosure	P1	green	power off	power on	standby

I/O enclosure rear

Table 4. Interpreting the LEDs on the I/O enclosure (rear)

Index	LED Function	Location	Color	LED Off	LED On	LED Flash
1	Power for I/O enclosure PCIe/SPCN card	P1-C7	green	power off	power on	power standby
2	Identify for I/O enclosure PCIe/SPCN card	P1-C7	amber	normal	fault	identify
3	Power for I/O enclosure	P1	green	power off	power on	n/a
4	Power for I/O enclosure PCI slot	P1-Cx	green	power off	power on	standby (card regulators off)
5	Identify for I/O enclosure PCI slot	P1-Cx	amber	normal	n/a	identify
6	Activity for I/O enclosure device adapter card port	P1-Cx-Ty x=3, 6	green	not ready Note 1	ready Note 2	n/a
7	Identify for I/O enclosure device adapter card port	P1-Cx-Ty x=3, 6	amber	normal	n/a	identify
8, 9	Fibre channel host card port LEDs (see Table 5, Table 6, Table 7, and Table 8)	P1-Cx-Ty x=1,4
10	Not used	P1-Cx-Ty x=2,5	green	n/a	n/a	n/a

Notes:

1. LED off indicates port is not ready.
2. LED on solid indicates port is ready (link is operational).

Fibre channel host card port LEDs

Table 5 and Table 6 provide detailed information on fibre channel host card port LEDs.

Important: Do not replace host adapter cards based on visual symptoms displayed in the LEDs. Replace them only when they are:

• Listed in a serviceable event FRU list, OR
• Isolated in an isolation procedure MAP

Note: In the following tables, LED terms are:

• Slow blinks are 1 per second
• Fast blinks are 4-5 per second
• Flashing is very fast blinking; the LED may look dimly lit

Table 5. Fibre channel host card port LEDs (8 Gb/sec adapters, normal conditions)

Adapter	Yellow LED	Green LED	State
8-Gb/s adapters	Off	Slow blink	Normal - link is down or not started
	2 blinks	On	2-Gb/s link rate - normal, link is up
	3 blinks	On	4-Gb/s link rate - normal, link is up
	4 blinks	On	8-Gb/s link rate - normal, link is up

Table 6. Fibre channel host card port LEDs (8 Gb/sec adapters, power-up, failure, download, or test conditions)

Adapter	Yellow LED	Green LED	State
8-Gb/s adapters	Off	Off	Wake-up failure (dead board)
		On	Failure when functioning
	On	Off	POST failure (dead board)
		On	Failure when functioning
	Slow blink	Off	Wake-up failure monitor
		Slow blink	Offline for download
	Fast blink	Off	POST failure
		Slow blink	Restricted offline mode (waiting for restart)
	Flashing	Off	POST process in progress
		Slow blink	Restricted offline mode (test active)

Table 7. Fibre channel host card port LEDs (16 Gb/sec adapters, normal conditions)

Adapter	Upper LED	Lower LED	State
16-Gb/s adapters	Off	On, green	4 Gb/s FC link rate - no I/O
		Fast blink, green	4 Gb/s FC link rate - active I/O
	On, green	Off	8 Gb/s FC link rate - no I/O
		On, green	16 Gb/s FC link rate - no I/O
	Fast blink, green	Off	8 Gb/s FC link rate - active I/O
		Fast blink, green	16 Gb/s FC link rate - active I/O

Table 8. Fibre channel host card port LEDs (16 Gb/sec adapters, power-up, failure, download, or test conditions)

Adapter	Upper LED	Lower LED	State
16-Gb/s adapters	Off	Off	Power off
	On, red	Off	POST failure
		On, red	Firmware fault
	Slow blink, white	Slow blink, white	Power on, firmware not initialized or hardware reset
	Slow blink, green	Slow blink, green	Link down