Storage enclosure LED indicators (Models 98x, SAS flash enclosure, 24 drive slots)

This section contains storage enclosure FRUs that have LED indicators. Each listed assembly is shown with a description of its LEDs. While LED indicators might indicate a failure, they should not be used as a starting point for a repair.

Storage enclosure FRUs with LEDs

Table 1. Parts of the storage enclosure that contain LEDs
Part name Refer to
Storage enclosure Figure 1
Drive module Figure 2
Enclosure services manager (ESM) Figure 3
Storage enclosure power supply Figure 4
Note: Microbay LED definitions are found in I/O enclosure LED indicators (Models 98x, 8xE) (not 983).

Storage enclosure LEDs

Figure 1. Storage enclosure LEDs
Storage enclosure LEDs
Table 2. Storage enclosure LEDs
Index LED name LED color Controlled by LED state Description
1 Power Green Hardware On Enclosure is powered on
Off Enclosure is powered off
2 Not present
3 Group identify Blue Firmware On A FRU in this enclosure is being identified
Off No FRU is being identified
4 Not present
5 Enclosure identify Amber Microcode On Not used
Off Enclosure not identified for repair
Flash Enclosure identified for repair

Drive module LEDs

Figure 2. Drive module LEDs
Disk drive modules (DDMs) LEDs (24 DDM slot storage enclosure)
Table 3. Drive module LEDs
Index LED name LED color Controlled by LED state Description
1 Power / Activity Green Drive On Drive ready, idle
Off Drive not ready
Fast flash Data transferring
Slow flash Format or capacitors charging
2 Identify Amber Microcode On Not used
Off Drive not identified for repair
Flash Drive identified for repair

Enclosure services manager (ESM) LEDs

Figure 3. Enclosure services manager (ESM) LEDs
Enclosure services manager (ESM) LEDs
Table 4. Enclosure services manager (ESM) LEDs
Index LED name LED color Controlled by LED state Description
1 SAS link status Green Hardware On SAS link is good
Off SAS link is bad
2 SAS cable identify Amber Microcode On Not used
Off SAS cable not identified for repair
Flash SAS cable identified for repair
3 ESM power Green Hardware On Power is on
Off Power is off
4 Group identify Blue Firmware On A FRU in this enclosure is being identified
Off No FRU is being identified
5 ESM identify Amber Microcode On Not used
Off ESM not identified for repair
Flash ESM identified for repair

Storage enclosure power supply LEDs

Figure 4. Storage enclosure power supply LEDs
Storage enclosure power supply LEDs
Table 5. Storage enclosure power supply LEDs
Index LED name LED color Controlled by LED state Description
1 Input Good Green Hardware On Input good
Off Input not within limits
2 DC Output Good Green Hardware On DC output good
Off DC output is off
3 Identify / Attention Amber Microcode On Fault
Off This FRU is not identified for repair
Flashing This FRU is identified for repair
4 Not used