MAP1470 Manually start the Certify drives process

Use this procedure only when you are sent here from another MAP. Use this MAP to manually start the Certify drives process.

Procedure

Manually start the Certify DDMs process.

From the Service interface:

  1. From the navigation area, click Storage Facility Management > storage facility.
  2. From the bottom Task area, click Service Utilities > View/Certify drives. A window opens and displays the number and type of drives to be certified.
  3. Click Certify.

From the DS8000 storage management GUI:

  1. From the navigation area, click Service > Install Hardware > View/Certify Drive.
  2. Click Certify.