FWPCI5

There is a partition firmware hang problem.

Before you begin

Note: Storage complex repair actions must always be managed from the management console. To replace any FRUs identified in this procedure, use Storage Facility Management > storage facility > Exchange Parts. If the FRUs are listed in this or another Serviceable Event, select them from there.

Procedure

Is a location code associated with this checkpoint?
  • Yes, replace the following parts one at a time until the problem is resolved:
    • The FRU identified by the location code.
    • The backplane that contains the slot in which the adapter was plugged.
  • No, call your next level of support for assistance.

What to do next

This ends the procedure.