I2CBUS

A fault was detected on the I2C bus.

Before you begin

Note: Storage complex repair actions must always be managed from the management console. To replace any FRUs identified in this procedure, use Storage Facility Management > storage facility > Exchange Parts. If the FRUs are listed in this or another Serviceable Event, select them from there.

Procedure

Is the reference code 3114?

Yes: Replace the I/O backplane.
No: Continue with the next FRU in the list.

Table 1. Replacing the failing part
Unit	Failing part(s)	How to replace the failing part
CEC enclosure	I/O backplane	Refer to Exchanging parts

What to do next

This ends the procedure.