BE2xxxxx
This section lists the BE2xxxxx system reference codes.
If the SRC listed in a serviceable event
is missing from the following table, ask your next level of support
for assistance.
Note: Next level, inform development of any SRCs not
defined in the table.
| System Reference Code | Description |
|---|---|
| BE220003 | The UPS lost its power source. |
| BE220004 | The UPS restored its power source. |
| BE220005 | The UPS reported a low battery charge condition. |
| BE220011 | The UPS has its output loads on bypass. |
| BE220013 | The UPS reported a general fault. |
| BE220015 | The UPS reported a battery ground fault. |
| BE220018 | The UPS reported a battery test failure. |
| BE220019 | The UPS reported a fuse failure. |
| BE220021 | The UPS reported an output overload error. |
| BE220023 | The UPS reported an output over current error. |
| BE220025 | The UPS reported an abnormal inverter error. |
| BE220027 | The UPS reported an abnormal rectifier error. |
| BE220029 | The UPS reported an abnormal reserve rectifier error. |
| BE220052 | The UPS reported the battery needs to be replaced. |
| BE220205 | An authentication failure occurred during an attempt to access a UPS. |
| System Reference Code | Description |
|---|---|
| BE230001 | The UPS communication heartbeat test reached the failure threshold. The remainder of the communication network is online. |
| BE230002 | The UPS communication heartbeat test reached the failure threshold because the communication network is offline. |
| BE230003 | The UPS communication heartbeat test is responding again. |
| BE230004 | The UPS configuration is not correct and could not be corrected. |
| BE230005 | The UPS has one or more power outputs off. |
| BE230006 | The UPS battery reached its end of life. |
| BE230007 | The UPS is in an unexpected state. |
| BE230008 | UPS battery fault detected. |