Removing orange shipping brackets
Procedure
-
Remove the front and rear door shipping support brackets, if present.
Note: When used, the brackets are at the right front and right rear of the frame. The front bracket is near the bottom of the frame. The rear bracket is near the door latch.
-
If there is an orange shipping bracket at the rear of a storage enclosure, remove it.
-
At the rear of the rack, loosen the fastener 1 that attaches the
orange shipping bracket to the left and right horizontal rails. See Figure 1.
Note: It might be necessary to disconnect storage enclosure power cables to remove the bracket. Ensure that the cables are reconnected to the correct power supplies.
-
Slide the bracket away from the storage enclosure so the middle support cross pin
2 disengages from the slot. See Figure 1.
Figure 1. Storage enclosure shipping bracket 
- Tighten the fasteners.
-
At the rear of the rack, loosen the fastener 1 that attaches the
orange shipping bracket to the left and right horizontal rails. See Figure 1.
- Go to the next section.