Routing and connecting the Rack-2 PCIe and PCN cables to Rack-1

Procedure

Note: The following figure shows an overview of the Rack-2 to Rack-1 routing of the PCIe  1  and PCN  2  cables. Models 981 and 98E is shown, routing is similar for models 980/98B and 982/98F.

  1. Do not route or connect the cables until directed in later steps.
    Figure 1. PCIe and PCN cable routing overview (Models 981, 98E)
    PCIe and PCN cable routing overview (Models 981, 98E)
  2. At the rear of Rack-2, uncoil the PCIe and PCN cables that are coiled behind the I/O enclosures.
  3. At the rear of Rack-2, route the PCIe and PCN cables to Rack-1 through the lower access hole at the side of the rack.
  4. At the rear of Rack-1, route and connect the PCIe cables to the proper CEC enclosure connectors. Use the location code label on each cable to determine the correct connector.
    1. CEC enclosure locations to connect model 98B to model 980:
      • XC1-P1-C6-T1 (upper CEC)
      • XC1-P1-C6-T2 (upper CEC)
      • XC2-P1-C6-T1 (lower CEC)
      • XC2-P1-C6-T2 (lower CEC)
      Note: For further information on model 980 CEC enclosure locations and PCIe cabling, refer to Figure 3, Figure 4, and Figure 5, at the end of this section.
    2. CEC enclosure locations to connect model 98E to model 981:
      • XC1-P1-C3-T1 (upper CEC)
      • XC1-P1-C3-T2 (upper CEC)
      • XC1-P1-C5-T1 (upper CEC)
      • XC1-P1-C5-T2 (upper CEC)
      • XC2-P1-C3-T1 (lower CEC)
      • XC2-P1-C3-T2 (lower CEC)
      • XC2-P1-C5-T1 (lower CEC)
      • XC2-P1-C5-T2 (lower CEC)
      Note: For further information on model 980 CEC enclosure locations and PCIe cabling, refer to 981 CEC enclosure locations and PCIe cabling, refer to Figure 7, Figure 8, and Figure 9, at the end of this section.
    3. CEC enclosure locations to connect model 982 to model 98F:
      • XC1-P1-C2-T1 (upper CEC)
      • XC1-P1-C2-T2 (upper CEC)
      • XC1-P1-C3-T1 (upper CEC)
      • XC1-P1-C3-T2 (upper CEC)
      • XC2-P1-C2-T1 (lower CEC)
      • XC2-P1-C2-T2 (lower CEC)
      • XC2-P1-C3-T1 (lower CEC)
      • XC2-P1-C3-T2 (lower CEC)
      Note: For further information on model 982 CEC enclosure locations and PCIe cabling, refer to Figure 8, Figure 11, and Figure 12 at the end of this section.
  5. At the rear of Rack-1, route and connect the PCN cables to the proper RPC connectors. Use the location code label on each cable to determine the correct connector. One cable goes to R1-C1-J302 (left RPC, facing rear), the other goes to R1-C2-J302 (right RPC, facing rear). See Figure 2.
    Note: For further information on PCN cabling refer to Figure 6 (model 980) or Figure 10 (model 981 and model 982), at the end of this section.
    Figure 2. Location codes for the RPC card (Model 98x)
    Location codes for the RPC card (Model 98x)
  6. Use cable ties to secure the cables to the cable brackets in both racks.
  7. Go to Completing the logical installation of the I/O enclosures.

Example

Reference: Model 980, 98B figures
Figure 3. CEC enclosure location codes (rear view) (Models 980 and 984)
CEC enclosure location codes (rear view)
Figure 4. CEC enclosure adapter ports (Model 980 and 984)
Note: For PCIe two-port card, see  1 . For I2C interface and RS-485 serial interface, see  2 . For Ethernet adapter, see  3 .
CEC enclosure adapter ports (Model 980)
Figure 5. PCIe cables, Models 980, 984, 98B, 84E
PCIe cables, Models 980, 984, 98B, 84E
Figure 6. Power control network (PCN) cables, Models 980, 984
Power control network (PCN) cables, Model 980
Figure 7. CEC enclosure location codes (rear view) (Models 981, 985, and 986)
CEC enclosure location codes (rear view)
Figure 8. CEC enclosure adapter ports (Model 981, 982, 985, 986, 988)
Note: For PCIe two-port card, see  1 . For I2C interface and RS-485 serial interface, see  2 . For Ethernet adapter, see  3 .
CEC enclosure adapter ports (Model 981)
Figure 9. PCIe cables, Models 981, 985, 986, 98E, 85E, 86E
PCIe cables, Models 981, 985, 986, 98E, 85E, 86E
Figure 10. Power control network (PCN) cables, Model 981, 982, 985, 986, 988
Power control network (PCN) cables, Model 981
Figure 11. CEC enclosure location codes (rear view) (Models 982, 988)
CEC enclosure location codes (rear view) (Model 982)
Figure 12. PCIe cables, Model 982, 988, 98F, 88E
PCIe cables, Model 982, 988. 98F, 88E